GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2004 🢒 ION 🢒 Restraints 🢒 Seat Belts 🢒 Child Restraint Tether Anchor Bezel Replacement

Removal Procedure

    Object Number: 876540 Size: SH
  1. Remove the rear window trim. Refer to Rear Window Shelf Trim Panel Replacement .

    2. Object Number: 876630 Size: SH
  2. Remove the tether anchor bezel fasteners.
  3. Remove the anchor bezel for the child restraint tether from the rear window trim.

Installation Procedure

    Object Number: 876627 Size: SH
  1. Install the tether anchor bezel to the rear window trim.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the anchor bezel fasteners.

    3. Tighten
    Tighten the fasteners to 1.4 N·m (12 lb in).


    Object Number: 876540 Size: SH
  3. Install the rear window trim. Refer to Rear Window Shelf Trim Panel Replacement .
  4. Close the tether anchor bezel.