Notice: When removing or installing the backup lamp switch, do not use an open end wrench. Use only a socket in order to avoid damage to the switch assembly.

1. Remove the left front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
2. Disconnect the backup lamp connector.



3. Remove the backup lamp switch assembly.

Notice: When removing or installing the backup lamp switch, do not use an open end wrench. Use only a socket in order to avoid damage to the switch assembly.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the backup lamp switch. using pipe sealant Saturn P/N 21485278 or equivalent.

Tighten
Tighten the switch to 24 N·m (18 lb ft).

2. Connect the backup lamp connector.
3. Install the left front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.