Tools Required

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the drive axle assembly. Refer to Wheel Drive Shaft Replacement in Wheel Drive Shafts.



3. Using J 45000 , remove the wheel drive shaft oil seal from the transmission case.

Important: The seal must install flush with the case flange.

1. Using the J 43068 , install the front wheel drive shaft oil seal into the transmission case.
2. Install the drive axle assembly. Refer to Wheel Drive Shaft Replacement in Wheel Drive Shafts.
3. Lower the vehicle
4. Check the transaxle fluid level. Refer to Transmission Fluid Check .

.