For 1990-2009 cars only
Tools Required
| • | 87 90 800 Drift, Differential Seal |
| • | 87 91 311 Bearing Driver Shaft Sleeve |
| • | 87 92 236 Support |
- Remove the input shaft bearing retainer screws and the retainer.
- Press out the input shaft bearing race using the87 90 800 . Use the 87 92 236 as a base for the pressing operation.
- Press out the output shaft bearing race using the87 91 311 .
- Remove the transaxle vent filter from the case using a punch. Drive the vent from the outside to the inside.
