GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2004 🢒 ION 🢒 Engine 🢒 Engine Controls - 2.0L (LSJ) 🢒 Vehicle Speed Sensor Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Disconnect the electrical connector from the vehicle speed sensor (VSS).

    3. Object Number: 1394764 Size: SH
  3. Remove the VSS retaining bolt, and remove the VSS.

Installation Procedure

    Object Number: 1394764 Size: SH
  1. Position the VSS to the VSS bracket. Ensure that the VSS locating pin fits securely in the locating hole on the bracket.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the vehicle speed sensor retaining bolt.

    3. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  3. Connect the electrical connector to the VSS.
  4. Lower the vehicle.