GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2004 🢒 ION 🢒 Engine 🢒 Engine Controls - 2.2L (L61) 🢒 Stop Lamp Switch Replacement

Stop Lamp Switch Replacement 2.2L L61

Removal Procedure

    Object Number: 878828 Size: SH
  1. Remove the accelerator pedal retaining nuts. Move the pedal aside.

    2. Object Number: 877870 Size: SH
  2. Remove the stop lamp switch by grasping the switch and turning it counterclockwise while pulling toward the front of the vehicle.
  3. Disconnect the stop lamp switch electrical connector.

Installation Procedure

    Object Number: 877870 Size: SH
  1. Connect the stop lamp switch electrical connector.
  2. Insert the stop lamp switch into the retainer.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 878828 Size: SH
  3. Install the accelerator pedal to the dash panel. Install the retaining nuts.

    4. Tighten
    Tighten the accelerator pedal retaining nuts to 10 N·m (89 lb in).

  4. Adjust the stop lamp switch. Refer to Stop Lamp Switch Adjustment .

Stop Lamp Switch Replacement 2.0L LSJ

Removal Procedure

    Object Number: 877870 Size: SH
  1. Remove the stop lamp switch by grasping the switch and turning it counterclockwise while pulling toward the front of the vehicle.
  2. Disconnect the stop lamp switch electrical connector.

Installation Procedure

    Object Number: 877870 Size: SH
  1. Connect the stop lamp switch electrical connector.
  2. Insert the stop lamp switch into the retainer.
  3. Adjust the stop lamp switch. Refer to Stop Lamp Switch Adjustment .