Power Door Locks Inoperative - All Doors and Switches. Saturn ION 2003

For 1990-2009 cars only

Makes 🢒 Saturn 🢒 2003 🢒 ION 🢒 Body and Accessories 🢒 Doors 🢒 Power Door Locks Inoperative - All Doors and Switches

Step	Action	Yes	No
Schematic Reference: Door Lock/Indicator Schematics Connector End View Reference: Power Door Systems Connector End Views or Body Control System Connector End Views in Body Control System DEFINITION: This diagnostic table should be used to diagnose a complete failure of the power door lock system.
1	Did you perform the Door Systems Diagnostic System Check?	Go to Step 2	Go to Diagnostic System Check - Door Systems
2	Activate both door lock switches to lock and unlock positions. Did any of the doors lock and unlock from either door lock switch?	Go to Symptoms - Doors	Go to Step 3
3	Did all of the doors lock and unlock from both switches?	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems	Go to Step 4
4	Install a scan tool. Monitor the Door Lock Switch and Decoded Switch State data parameters. Do both data parameters show an active switch state?	Go to Step 5	Go to Step 7
5	Test both door lock switch signal circuits for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition?	Go to Step 10	Go to Step 6
6	Inspect for poor connections at the faulty door lock switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition?	Go to Step 10	Go to Step 8
7	Inspect for poor connections at the faulty BCM. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition?	Go to Step 10	Go to Step 9
8	Replace the faulty door lock switch. Refer to Door Lock Switch Replacement . Did you complete the repair?	Go to Step 10	--
9	Important: Perform the set up procedure for the BCM. Refer to Body Control Module (BCM) Programming/RPO Configuration in Body Control System. Replace the BCM. Refer to Body Control Module Replacement in Body Control System. Did you complete the repair?	Go to Step 10	--
10	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2