GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 861219  Size: SH
  1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement in Doors.
  2. Remove the front door speaker screws.
  3. Disconnect the electrical connector from the speaker.
  4. Remove the speaker from the front door.

Installation Procedure


    Object Number: 1344617  Size: SH
  1. Remove the drip cover from the speaker frame by unsnapping the 4 locking tabs on the cover near the fastener holes.

  2. Object Number: 1344622  Size: SH
  3. Apply a ¼ in bead of Kent® High Tech Seam Sealer - Clear Transparent, or equivalent, around the speaker frame where the drip cover contacts the back of the speaker frame.
  4. Install the drip cover to the speaker frame.

  5. Object Number: 861219  Size: SH
  6. Connect the electrical connector to the speaker.
  7. Install the speaker to the front door.
  8. Notice: Refer to Fastener Notice in the Preface section.

  9. Install the screws to the speaker.
  10. Tighten
    Tighten the screws to 1.2 N·m (9 lb in).

  11. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement in Doors.