Removal Procedure
- Remove the instrument panel (I/P) retainer. Refer to
Instrument Panel Retainer Replacement
in Instrument Panel, Gages,
and Console.
- Unsnap the defroster duct from the HVAC
module and cross car beam. Bend the cluster wire harness tab on the cross car beam
in order to remove the duct.
Installation Procedure
- Align the defroster duct with the HVAC module
and snap into place.
- If the cluster wire harness tab on the cross car beam was bent during
removal, bend the tab back into position.
- Install the I/P retainer. Refer to
Instrument Panel Retainer Replacement
in Instrument Panel, Gages, and Console.