GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2003 🢒 ION 🢒 Engine 🢒 Engine Electrical 🢒 Engine Mount Bracket Replacement

Removal Procedure
  1. Remove the engine mount. Refer to Engine Mount Replacement .

    2. Object Number: 851554 Size: SH
  2. Remove the intermediate bracket to engine bolts.
  3. Remove the intermediate bracket from the engine.

Installation Procedure

    Object Number: 851554 Size: SH
  1. Install the intermediate bracket to the engine.
  2. Hand tighten the engine mount intermediate bracket bolts in the following locations:
    3. • The long bolts in the forward and front lower holes
    • The short bolt in the rear upper hole

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Tighten the intermediate bracket bolts.

    4. Tighten
    Tighten the bolts to 100 N·m (74 lb ft).

  4. Install the engine mount. Refer to Engine Mount Replacement .