GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.

  1. Disconnect the battery.
  2. Wait 1 minute for the airbag to deactivate.

  3. Object Number: 1936471  Size: LF
  4. Remove the resonator.
  5. • Remove the bolt (2).
    • Remove the resonator (1) from the guide (arrow).

    Object Number: 1937634  Size: LH
  6. Remove the airbag sensor.
  7. • Remove the 2 bolts (1).
    • Disconnect the wiring harness plug and remove the sensor.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.

  1. Install the airbag sensor.
  2. Insert the sensor and connect the wiring harness plug.

    Tighten
    Tighten the 2 bolts to 6 N·m (53 lb in).

  3. Install the resonator.
  4. Insert the resonator into the guide.

    Tighten
    Tighten the bolt to 2.5 N·m (22 lb in).

  5. Connect the battery.
  6. Tighten
    Tighten the bolt to 5 N·m (44 lb in).

  7. Perform the readiness inspection.
  8. For programming procedures, refer to Control Module References .