Removal Procedure
- Remove the instrument panel (I/P) compartment.
1.1. | Open the I/P compartment door. |
1.2. | Remove the 4 bolts (1). |
1.3. | Disconnect the wiring harness plug. |
1.4. | Remove the I/P compartment. |
- Remove the I/P compartment door damper.
2.1. | Release the fastening clip (1). |
Installation Procedure
- Install the I/P compartment.
Install the fastening clamp.
Notice: Refer to Fastener Notice in the Preface section.
- Install the I/P compartment.
2.1. | Connect the wiring harness plug. |
2.2. | Insert the I/P compartment. |
Tighten
Tighten the 4 bolts to 4 N·m (35 lb in).
2.3. | Close the I/P compartment door. |