Removal Procedure
- Remove the instrument panel (I/P) compartment.
1.1. | Open the I/P compartment cover. |
1.2. | Remove the 4 bolts (1). |
1.3. | Disconnect the wiring harness plug. |
1.4. | Remove the I/P compartment. |
- Support the I/P compartment door damper.
2.1. | Release the fastening clip (1). |
- Release and remove the I/P compartment door.
3.1. | Remove the 2 bolts (2). |
3.2. | Remove the I/P compartment door. |
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the I/P compartment door.
Tighten
Tighten the 2 bolts to 2.5 N·m (22 lb in).
- Install the I/P compartment door damper.
Install the fastening clamp.
- Install the I/P compartment.
3.1. | Connect the wiring harness plug. |
3.2. | Insert the I/P compartment. |
Tighten
Tighten the 4 bolts to 4 N·m (35 lb in).
3.3. | Close the I/P compartment door. |