Special Tools
SA9179NE
Dial Indicator
- Assembly the
SA9179NE
in a verticle position as shown.
- Set the blind bolt to the hole in the next figure shown.
Important: Do not measure when the valve body is assembled in the transmission case.
- Measure the rod stroke applying and releasing the compressed air 392 KPa (56 psi) to hole (2) if the rod stroke is within the specifications.
Specification
Rod Stroke 2.659-3.141 mm (0.105-0.124 in)
- If the rod stroke is out of specifications, choose appropriate rod with the right length. Refer to
2-4 Band Servo Piston Pin Selection
.