- Remove the 2 manual shaft detent spring bolts (712) and the detent lever spring (711).
- Remove the 2 manual shift shaft detent lever bolts (715 and 718).
- Remove the park pawl pin spring (704) and spring guide sleeve (705).
- Remove the park pawl lock guide (708).
- Remove the park pawl shaft (700) and park pawl return spring (701).
- Remove the park pawl (702) from the transmission case assembly (17).
- Remove the park pawl locking pin (703) and the park pawl stop pin (717).
- Disconnect the park pawl actuator rod (709) from the manual shift shaft detent lever (710).
- Using a chisel and hammer, cut the manual shift shaft spacer (714) and remove it.
- Using a punch and hammer, drive out the manual shift shaft locking pin (719).
- Slide out the manual shift shaft (716) and remove the manual shift shaft detent assembly (710).
- Using a screwdriver, remove the manual shift shaft seal assembly (713).