For 1990-2009 cars only
Diagnostic Instructions
| • | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
| • | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
| • | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
DTC Descriptor
DTC B1245 00: CD-Changer MalfunctionDTC B1245 61: CD-Changer Loading Sledge Malfunction
DTC B1246 00: CD-Change Track Read Error
DTC B1247 13: CD-Change High Temperature
DTC B1249 08: CD-Change Table of Contents Read Error
Circuit/System Description
The radio monitors the CD change for any errors or malfunctions during operation.
Conditions for Running the DTC
This test runs continuously.
Conditions for Setting the DTC
A malfunction is detected in the CD changer.
Action Taken When the DTC Sets
CD changer operation will be disabled.
Conditions for Clearing the DTC
The DTC will clear when a CD change malfunction is no longer detected.
Reference Information
Schematic Reference
Connector End View Reference
Description and Operation
Radio/Audio System Description and Operation
Electrical Information Reference
Scan Tool Reference
Control Module References for scan tool information
Circuit/System Verification
Ignition ON, verify DTC B1245, B1246, B1247, or B1249 is not set.
| ⇒ | If any of the DTCs are set, replace the radio. |
Repair Instructions
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for radio replacement, programming, and setup
