GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1941007  Size: SH
  1. Remove the front side door panel.
  2. Remove the access panel (1) with a plastic wedge.


    Object Number: 1941200  Size: LF

    Important: The moveable handle part must now be secured in pulled position.

  3. Remove the fixed handle part of the front door with lock cylinder.
  4. • Pull out and hold the moveable handle part (I).
    • Turn the bolt (II) left until it stops.
    • Remove the fixed handle part with lock cylinder (III).

    Object Number: 1941199  Size: SH
  5. Remove the lock cylinder cover.
  6. Remove the cover cap.

Installation Procedure

  1. Install the lock cylinder cover.
  2. Clip the cover into position.

    Important: Hold the moveable handle part in place while turning bolt.

  3. Install the front door fixed handle part with lock cylinder.
  4. • Install the fixed handle part with the lock cylinder.
    • Turn the bolt right until it stops.
    • Insert the cover cap.
  5. Install the front side door panel.