Removal Procedure
- Remove the upper extension trim panel.
- Release the 3 clips.
- Disconnect the wiring harness plug.
- Remove the front door outer mirror.
4.1. | Disconnect the wiring harness plug. |
4.3. | Remove the outer mirror. |
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the front door outer mirror.
Tighten
Tighten the 3 bolts to 5 N·m (44 lb in).
- Connect the wiring harness plug.
- Install the outer mirror inner paneling.
- Connect the wiring harness plug.
- Install the 3 clips.
- Perform the operational inspection.