GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2008 🢒 Astra 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Air Inlet Valve Actuator Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.

    Important: Only upon replacement of air inlet actuator.

  1. Disconnect the battery.

    2. Object Number: 1937026 Size: LH
  2. Remove the instrument panel (I/P) compartment.
    3. 2.1. Remove the 4 bolts (1).
    2.2. Disconnect the wiring harness plugs.

    Object Number: 1937011 Size: SH
  3. Remove the recirculation actuator (1).
    4. • Remove the 3 bolts.
    • Disconnect the wiring harness plug (2).
    • Release and disconnect the wiring harness plug.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.

    Important: The recirculation actuator can only be fitted in one position and is self-calibrating.

  1. Install the recirculation actuator.

    2. Tighten
    Tighten the 3 bolts to 5 N·m (44 lb in).

  2. Connect the wiring harness plug.
  3. Install the I/P compartment.
  4. Connect the wiring harness plug.

    5. Tighten
    Tighten 4 bolts to 4 N·m (35 lb in).

    Important: Only upon replacement of air inlet actuator.

  5. Connect the battery.
  6. For programming procedures, refer to Control Module References .
  7. Perform the function inspection.