Removal Procedure
- Remove the heating/air conditioning control. Refer to
Heater and Air Conditioning Control Replacement.
- Remove the accessory panel on instrument panel (I/P) padding.
2.1. | Remove the 2 bolts (1). |
2.3. | Disconnect the wiring harness plug (2). |
2.4. | Release and disconnect the wiring harness plug. |
- Remove the accessory panel.
Release the 2 locks (1).
Installation Procedure
- Install the accessory panel.
Notice: Refer to Fastener Notice in the Preface section.
- Install the accessory panel on I/P padding.
• | Connect the wiring harness plug. |
• | Install the accessory trim panel. |
Tighten
Tighten the 2 bolts to 2.5 N·m (22 lb in).
- Install heating/air conditioning unit control. Refer to
Heater and Air Conditioning Control Replacement.