GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1936965  Size: SH
  1. Raise the vehicle by its full height.
  2. Remove the engine front mount.
  3. • Remove the 2 bolts (1).
    • Remove the screwed connection (2).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.

  1. Install the engine front mount.
  2. Use new nuts.

    Tighten

        • Tighten the screwed joint to 55 N·m (40 lb ft).
        • Tighten the 2 bolts to 80 N·m (59 lb ft).
  3. Lower the vehicle.