Removal Procedure
- Remove the throttle valve module. Refer to
1401335 - Replace Throttle Valve Module
.
- Remove the spark plugs. Refer to
1401340 - Spark Plugs, Remove and Install
.
- Remove the relay holder cover.
- Remove the fuel pump relay.
Draw relay K3 out of mounting plug.
Measurement Procedure
Compression, Check
| Important: Engine revs at least 300/min.
|
• | Start the engine (approx. 4 seconds). |
• | Compare the compression values. |
| Maximum pressure differential 100 kPa (1 bar) |
Installation Procedure
- Install the fuel pump relay.
• | Ensure the plug contacts are sound. |
- Install the relay carrier cover.
- Install the spark plugs. Refer to
1401340 - Spark Plugs, Remove and Install
.
- Install the throttle valve module. Refer to
1401335 - Replace Throttle Valve Module
.