For 1990-2009 cars only
Unable To Relearn YAW Sensor After Replacement - keywords after C0186 C0196 C0252 C0253 C02925 calibrate inop inoperative program
| Subject: | Unable to Relearn YAW Sensor After Replacement |
| Models: | 2008 Chevrolet Malibu (GMX-386) |
| 2008 Pontiac G6 |
| 2008 Saturn Aura |
This PI was superseded to clarify Condition/Concern and Recommendation/Instructions. Please discard PIC4688.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition/Concern:
TAC callers have reported that they CANNOT relearn the YAW sensor after replacement. The current service information has NOT been updated to reference the correct relearn procedure.
Recommendation/Instructions:
Please follow SI-2000 Document ID# 1470982 to relearn the yaw sensor after replacement.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.
