Subject: | Malfunction Indicator Lamp (MIL)/Service Engine Soon (SES) Lamp Illuminated, DTC P0106 (MAP Sensor Performance) and/or P0133 (HO2S Slow Response Sensor 1) Set (Reprogram ECM) |
Models: | 2006-2007 Chevrolet Aveo |
2006-2007 Pontiac Wave (Canada Only) |
Some customers may comment that the Check Engine or SES lamp is illuminated. Technicians may find DTCs P0106 (MAP Sensor Performance) and/or P0133 (HO2S Slow Response Sensor 1) set.
Reprogram the engine control module (ECM) with the appropriate calibration following the procedure below.
Important: Prior to reprogramming, check the battery voltage state. If the battery is not fully charged, charge the battery.
Important: Prior to reprogramming, make sure the Tech 2® is updated with the latest software.
The new ECM calibrations will be available to dealerships in TIS2 Web version 2.5 for 2007 (available 2/19/07). If you cannot access the calibration, call the Techline Customer Support Center (TCSC) at 1-800-828-6860 (English) or 1-800-503-3222 (French) and it will be provided. As always, make sure your Tech 2® is updated with the latest software version.
Vehicle | ECM P/N | SW Description | Remarks |
---|---|---|---|
2006 Aveo/Wave with Manual Transmission | 96851098 | KMXT | Delphi |
2006 Aveo/Wave with Automatic Transmission | 96851099 | KMAU | |
2007 Aveo/Wave with Manual Transmission | 96851084 | KMYT | |
2007 Aveo/Wave with Automatic Transmission | 96851085 | KMBU |
For vehicles repaired under warranty, use:
Labor Operation | Description | Labor Time |
---|---|---|
J6354 | Powertrain Control Module Engine Reprogramming Using SPS | Use Published Labor Operation Time |