GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2008 🢒 Vibe - FWD 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Instrument Panel Accessory Trim Plate Replacement - Left Side

Removal Procedure

    Object Number: 843695 Size: SH
  1. Using a taped flat bladed tool, gently pry and release the retaining clips which secure the IP accessory left trim plate (1) to the instrument panel assembly.
  2. Disconnect the following components:
    3. • The power mirror switch electrical connector
    • The dimmer switch electrical connector
  3. Remove the power mirror switch, if necessary. Refer to Power Mirror Switch Replacement.
  4. Remove the dimmer switch, if necessary. Refer to Instrument Panel Lamp Dimmer Switch Replacement.

Installation Procedure

    Object Number: 843695 Size: SH
  1. Install the dimmer switch, if removed. Refer to Instrument Panel Lamp Dimmer Switch Replacement.
  2. Install the power mirror switch, if removed. Refer to Power Mirror Switch Replacement.
  3. Connect the following components:
    4. • The dimmer switch electrical connector
    • The power mirror switch electrical connector
  4. Install the IP accessory center trim plate (1) to the IP assembly. Ensure that the retaining clips are fully engaged.