GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 Vibe - FWD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Rear Side Door Trim Panel Replacement

Removal Procedure

    Object Number: 847858 Size: SH
  1. Remove the rear side door inside handle. Refer to Rear Side Door Inside Handle Replacement .
  2. Remove the screw (4) and trim cover (3) from the rear side door trim panel (1).
  3. Remove the screw (2) that retains the door trim panel (1).

    4. Object Number: 242337 Size: SH
  4. Remove the rear side door window regulator handle by using a cloth to pull off the snap ring, if equipped.
  5. Using a taped flat bladed tool, gently pry the rear side door window switch bezel from the rear side door trim, if equipped.
  6. Disconnect the rear side door window switch electrical connector, if equipped.
  7. Remove the rear side door window switch bezel from the vehicle, if equipped.

    8. Object Number: 847865 Size: SH
  8. Unclip and remove the rear side door trim from the door by disengaging the 7 plastic retainers.

Installation Procedure

    Object Number: 847865 Size: SH
  1. Position and install the rear side door trim to the door and press the 7 plastic retainers into place. Ensure that the plastic retainers are completely engaged.
  2. Connect the rear side door window switch electrical connector, if equipped.
  3. Install the rear side door window switch bezel to the rear side door trim, if equipped.

    4. Object Number: 471216 Size: SH
  4. Install the rear side door window regulator handle snap ring (1) to the rear side door window regulator handle (2), if equipped.
  5. Install the regulator handle (2) to the door, if equipped.

    6. Object Number: 847858 Size: SH
  6. Install the screw (2) that retains the rear door trim panel (1).
  7. Install the trim cover (3) and screw (4) to the rear side door trim panel (1).
  8. Install the rear side door inside handle. Refer to Rear Side Door Inside Handle Replacement .