Stabilizer Shaft Replacement FWD

1. Remove the following components as an assembly. Refer to Front Suspension Crossmember Replacement .

•	The front suspension crossmember

•	The trans support

•	The front control arms

•	The stabilizer shaft

•	The stabilizer shaft links

•	The stabilizer shaft clamps

•	The stabilizer shaft insulators




2. Remove the 2 nuts and the 2 stabilizer shaft links from the stabilizer shaft.
3. Remove the 4 bolts from the stabilizer shaft clamps.
4. Remove the 2 stabilizer shaft clamps.
5. Remove the 2 stabilizer shaft insulators.
6. Remove the stabilizer shaft from the crossmember.

1. Place the stabilizer shaft on the crossmember.
2. Install the 2 stabilizer shaft insulators to the stabilizer shaft.
3. Install the 2 clamps to the insulators.

Notice: Refer to Fastener Notice in the Preface section.

4. Install the 4 bolts to the clamps.

Tighten
Tighten the bolts to 19 N·m (14.0 lb ft).

5. Install the 2 stabilizer shaft links and the 2 nuts to the stabilizer shaft.

Tighten
Tighten the nuts to 74 N·m (54.6 lb ft).

6. Install the stabilizer shaft and the crossmember to the vehicle. Refer to Front Suspension Crossmember Replacement .