GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 Vibe - FWD 🢒 Engine 🢒 Engine Mechanical - 1.8L (LV6) 🢒 Cylinder Head Cover Installation

    Object Number: 829030 Size: SH

    Important: Use a new cylinder head cover gasket and new seal washers whenever the cylinder head cover replacement procedure is performed.

    Ensure that the new gasket and the new seal washers are correctly positioned during the cylinder head cover installation.

  1. Install the new cylinder head cover gasket to the cylinder head cover.
  2. Install the new seal washers to the cylinder head cover.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the cylinder head cover to the cylinder head. Secure the cover using nine bolts.

    4. Tighten
    Tighten the cylinder head cover bolts to 10 N·m (7 lb ft).