Tools Required

Caution: Refer to Safety Glasses Caution in the Preface section.

Important: Ensure that the valve train components are kept together and identified in order for proper re-installation in their original position.




1. Compress the valve spring. Use the J 8062 .



2. Remove the valve keepers. Use the J 43184  (2).



3. Slowly release the J 8062 from the valve spring assembly.
4. Remove the retainer (4).
5. Remove the spring (3).
6. Remove the spring seats (2).




Notice: Do not damage the valve guide. Remove any burrs that have formed at the key groove by chamfering the valve stem with an oil stone or a file.

7. Remove the valve seal.
8. Remove the valve.
9. Remove the remaining valve springs and valves.