Removal Procedure
- Open the instrument panel compartment.
- Remove the screw (2) from the
right side of the compartment door (1) .
- Push in on each side of the compartment door and lower the door.
- Remove the two screws (3) from
the outlet duct (4).
- Remove the outlet duct (4) from the HVAC module (2).
Installation Procedure
- Install the outlet duct (4) to
the HVAC module (2). Secure with the two screws (3).
- Push in on each side of the compartment door and raise the door
onto place.
- Install the screw (2) to the right
side of the compartment door (1).
- Close the instrument panel compartment.