Important: Review the system operation in order to familiarize yourself with the system functions. Refer to the following:
Visual/Physical Inspection
| • | Inspect for aftermarket devices which could affect the operation of the starting, charging, or ignition systems. Refer to
Checking Aftermarket Accessories
. |
| • | Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom. |
| • | Inspect the battery for correct installation and physical damage. |
| • | Inspect the wiring for damage. Inspect the connections to the starter motor, the starter solenoid, the ignition switch, the battery, and all related ground points. |
| • | When the charging system is operating normally, the charge indicator lamp will come ON when the ignition switch is turned ON and will go out when the engine starts. |
| • | Inspect the generator for loose or improper mounting and the generator drive belt for correct installation. |
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to
Testing for Intermittent Conditions and Poor Connections
.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
