Removal Procedure
- Open the door.
- Remove the bolt (3) that retains the front door check link (2) to the door jamb.
- Remove the following components from the door (3):
• | The front door weatherstrip (2) |
• | The plastic retainers (1) |
Installation Procedure
- Install the front door weatherstrip (2) to the door (3). Ensure that the plastic retainers (1) are completely
engaged.
Notice: Refer to Fastener Notice in the Preface section.
- Install the bolt (3) that retains the front door check link (2) to the door jamb.
Tighten
Tighten the bolt to 5.5 N·m (49 lb in).
- Close the door.