GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2003 🢒 Vibe - FWD 🢒 Body and Accessories 🢒 Doors 🢒 Door Window Guide Replacement

Removal Procedure

    Object Number: 846805 Size: SH
  1. Remove the rear side door trim. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the rear water deflector. Refer to Rear Side Door Water Deflector Replacement .
  3. Loosen the rubber window run channel along the center guide channel.
  4. Remove the following components from the rear door:
    5. • The 2 bolts (2)
    • The 2 screws (3)
    • The window guide channel (1)

Installation Procedure

    Object Number: 846805 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the window guide channel (1) to the rear door. Secure the guide channel with the 2 bolts (2) and the 2screws (3).

    2. Tighten
    Tighten the window guide channel bolts to 6.2 N·m (55 lb in).

  2. Install the rubber window run channel into the center guide channel.
  3. Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
  4. Install the rear side door trim. Refer to Rear Side Door Trim Panel Replacement .