GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2003 🢒 Vibe - FWD 🢒 Engine 🢒 Engine Electrical 🢒 Front Floor Console Trim Plate Replacement

Removal Procedure

    Object Number: 834948 Size: SH
  1. Remove the manual transmission shift knob, if equipped.
  2. Remove the center A/C control knob (3).
  3. Remove the screw (1).
  4. Using a taped flat bladed tool, gently pry and release the retaining clips which secure the front floor console trim plate (2) to the front floor console assembly.
  5. Disconnect the following components:
    6. • The 2 cigar lighter electrical connectors
    • The accessory power receptacle electrical connectors
  6. Remove the cigar lighter assembly, if necessary. Refer to Cigar Lighter Housing Replacement .
  7. Remove the accessory power receptacle, if necessary. Refer to 115-Volt AC Instrument Panel Accessory Power Receptacle Replacement in Power Outlets.

Installation Procedure

    Object Number: 834948 Size: SH
  1. Install the accessory power receptacle, if removed. Refer to 115-Volt AC Instrument Panel Accessory Power Receptacle Replacement in Power Outlets.
  2. Install the cigar lighter assembly, if removed. Refer to Cigar Lighter Housing Replacement .
  3. Connect the following components:
    4. • The 2 cigar lighter electrical connectors
    • The accessory power receptacle electrical connectors
  4. Install the front floor console trim plate (2) to the front floor console assembly. Ensure that the retaining clips are fully engaged.
  5. Install the center screw (1).
  6. Install the center A/C control knob (3).
  7. Install the manual transmission shift knob, if equipped.