Front Seat Adjuster Track Finish Cover Replacement Outboard

1. Disable driver seat SIR, if removing driver seat outer track cover. Refer to SIR Disabling and Enabling in SIR.
2. Disable passenger seat SIR, if removing passenger seat outer track cover. Refer to SIR Disabling and Enabling in SIR.
3. Remove the recliner handle (2) from the front seat outboard adjuster by disengaging the retaining tab (1).



4. Remove the 2 screws (2) from the outer track cover (3).
5. Disengage the tabs (1) from the outer track cover (3).
6. Remove the outer track cover (3).

1. Install the outboard adjuster finish cover (3) to the front seat assembly, by engaging the tabs (1).
2. Install the 2 screws (2) to the outer track cover (3).



3. Install the recliner handle (2) to the front seat outboard adjuster .
4. Make sure recliner handle tab (1) engages to the recliner.
5. Enable driver seat SIR, if outer track cover is removed. Refer to SIR Disabling and Enabling in SIR.
6. Enable passenger sear SIR, if outer track cover is removed. Refer to SIR Disabling and Enabling in SIR.

Front Seat Adjuster Track Finish Cover Replacement Inboard

1. Remove the front floor rear console. Refer to Rear Floor Console Replacement in Instrument Panel, Gages and Console.
2. Remove the following components from the front seat inboard adjuster:

•	The 2 screws (1)

•	The inboard adjuster finish cover (4)

1. Install the inboard adjuster finish cover (4) to the front seat inboard adjuster. Secure the cover with the 2 screws (1).
2. Install the front floor rear console. Refer to Rear Floor Console Replacement in Instrument Panel, Gages and Console.