GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Vibe - AWD 🢒 Body 🢒 Body Rear End 🢒 Liftgate Outside Handle Replacement

Removal Procedure

    Object Number: 824937 Size: SH
  1. Remove liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
  2. Open the liftgate.
  3. Disconnect cable from handle.
  4. Remove the 2 nuts (1) from the liftgate handle (2).
  5. Remove the liftgate handle (2) from the liftgate applique studs (3).

Installation Procedure

    Object Number: 824937 Size: SH
  1. Install the liftgate handle (2) to the liftgate applique studs (3).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the 2 nuts (1)to the liftgate handle (2).

    3. Tighten
    Tighten the liftgate handle nuts to 4.0 N·m (35 lb in).

  3. Connect the cable to liftgate handle.
  4. Install liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
  5. Close the liftgate.