GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Vibe - AWD 🢒 Body 🢒 Body Rear End 🢒 Liftgate Lock Striker Replacement

Removal Procedure

    Object Number: 850555 Size: SH
  1. Remove the lift gate sill trim plate. Refer to Liftgate Door Sill Plate Replacement in Interior Trim.
  2. Remove the following components from the vehicle:
    3. • The 2 bolts (2)
    • The rear lift gate striker (1)

Installation Procedure

    Object Number: 850555 Size: SH
  1. Install the lift gate striker (2) to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Secure the striker with the 2 bolts (2).

    3. Tighten
    Tighten the rear compartment lid lock striker bolts to 11.5 N·m (9 lb ft).

  3. Install the lift gate sill trim plate. Refer to Liftgate Door Sill Plate Replacement in Interior Trim.