---------------------------------------------------------------------- REVISION 01/06/94
SOME CUSTOMERS MAY COMMENT THAT THE LIFTGATE DOES NOT LOCK.
THE LOCK CYLINDER LOCK OUT PIN MAY BE LOOSE OR MISSING (SEE ILLUSTRATION).
INSTALL POWER DOOR LOCK ACTUATOR, P/N 10242895, TO CORRECT LOCKING FEATURE FOLLOWING PROCEDURE BELOW.
1. REMOVE TRIM PANEL.
2. REMOVE LOCK PLATE ASSEMBLY.
3. REMOVE LOCK CYLINDER RETAINING CLIP AND DISCARD CLIP.
4. INSTALL POWER DOOR LOCK ACTUATOR P/N 10242895.
5. CUT THE ELECTRICAL CONNECTOR AND WIRE FROM THE ACTUATOR AND DISCARD.
6. INSURE THAT THE ACTUATOR'S WIRE RETAINING CLIP DOES NOT OVERLAP THE KEY CYLINDERS RETURN SPRING.
7. CYCLE THE KEY CYLINDER IN THE LOCK DIRECTION (COUNTER-CLOCKWISE) TO INSURE THE ACTUATOR'S PIN IS ENGAGED.
8. REINSTALL LOCK PLATE AND TRIM PANEL.
PARTS ARE CURRENTLY AVAILABLE FROM GMSPO.
FOR VEHICLES REPAIRED UNDER WARRANTY, USE: LABOR OPERATION: B6180 USE PUBLISHED LABOR OPERATION TIME.
FIGURES: 1
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1993 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.