Low, No Windshield Washer Flow (Replace Washer Pump Filter with Plain Grommet

Some customers may comment on low or no windshield washer flow.

This condition may be caused by a clogged washer pump filter. Extended use with the filter clogged may have also caused the washer pump to burn out.

Technicians are to replace the pump filter with a new style plain grommet.

Notice: If further diagnosis leads to the washer pump being inoperative, replace the windshield washer pump.

1. Remove the windshield washer container. Refer to SI for Windshield Washer Solvent Container Replacement.
2. Remove the washer solvent filter grommet from the pump.



3. Replace the washer solvent pump filter grommet with a new part (see figure above).

Important: DO NOT replace the washer pump and kit unless further diagnosis leads you to an inoperative pump.

For vehicles repaired under warranty, use: