Removal Procedure
- Loosen the charge air cooler hose clamp (1) at the throttle body.
- Loosen the charge air cooler hose clamp (2) at the charge air cooler outlet pipe.
- Remove the charge air cooler hose from the throttle body and the outlet pipe.
Installation Procedure
- Install the charge air cooler hose to the outlet pipe and the throttle body.
- Tighten the charge air cooler hose clamp (2) at the charge air cooler outlet pipe.
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the charge air cooler hose clamp (1) at the throttle body.
Tighten
Tighten the charge air cooler hose clamps to 5 N·m (44 lb in).