Preliminary Procedure

1. Remove the front seat. Refer to Driver and Passenger Seat Replacement .
2. Remove the front seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement .
3. Remove the seat back frame. Refer to Front Seat Back Frame Replacement .
4. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References .

1

Bolt, Seat Cushion Frame (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
25 N·m (18 lb ft)

2

Frame Assembly, Seat Cushion

Tip
Disconnect any electrical harness or connectors attached to the seat frame and reference for installation.

Preliminary Procedures

1. Remove the front seat. Refer to Driver and Passenger Seat Replacement .
2. Remove the front seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement .

1

Seat Cushion Frame Bolt (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
9 N·m (80 lb in)

2

Seat Cushion Frame Assembly

Procedure

1. Disconnect any wiring connectors, if equipped.
2. If working on the passenger seat, re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References .