For 1990-2009 cars only
- Remove the rear compartment lid inner trim panel.
- Pull the foam sound insulator back from the adjuster.
- Release the adjuster cable catch by releasing the four tabs (1) by using a small flatbladed screwdriver.
- Pull the cable adjuster catch (1) back to release the cable.
- Remove any slack in the cable by pushing the excess cable (1) towards the adjuster.
- Push the cable adjuster catch back in place making sure all four catch tabs lock in place.
- Pull the foam sound insulator back in place.
- Install the rear compartment lid inner trim panel.
Important: Do not over pry on the catch tabs. If any tabs break the catch may not stay in place and the cable assembly may have to be replaced.
Important: Absolutely do not pull the catch entirely out of the adjuster. If the catch is removed the tabs will break and the entire cable will require replacement.
- Remove the rear compartment lid trim panel to access the adjusters. Refer to Rear Compartment Lid Inner Panel Trim Replacement.
- Pull the foam sound insulator back from the adjuster.
- Release the adjuster cable catch by releasing the four tabs (1) by using a small flatbladed screwdriver.
- Pull the cable adjuster catch (1) back to release the cable.
- Remove any slack in the cable by pushing the excess cable (1) towards the adjuster.
- Push the cable adjuster catch back in place making sure all four catch tabs lock in place.
- Pull the foam sound insulator back in place.
- Install the rear compartment lid trim panel. Refer to Rear Compartment Lid Inner Panel Trim Replacement.
Important: Do not over pry on the catch tabs. If any tabs break the catch may not stay in place and the cable assembly may have to be replaced.
Important: Absolutely do not pull the catch entirely out of the adjuster. If the catch is removed the tabs will break and the entire cable will require replacement.
