GM Service Manual Online
For 1990-2009 cars only

Object Number: 1581637  Size: MF

Callout

Component Name

Preliminary Procedures

  1. Open the hood.
  2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  3. Disengage the connector positive assurance (CPA) clip from the wiper motor electrical connector.
  4. Disconnect the wiper motor electrical connector from the wiper motor.

1

Bolts, Windshield Washer System Module (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tip

  1. Install the driver side bolt first.
  2. Install the passenger side bolt second.
  3. Install the center bolt third.

Tighten
9 N·m (80 lb in)

2

Module Assembly, Windshield Washer System


Object Number: 1853557  Size: SF

Callout

Component Name

Preliminary Procedures

  1. Open the hood.
  2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  3. Disengage the connector positive assurance (CPA) clip from the wiper motor electrical connector.
  4. Disconnect the wiper motor electrical connector from the wiper motor.

1

Windshield Washer System Module Bolt (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Procedure

  1. Install the driver side bolt first.
  2. Install the passenger side bolt second.
  3. Install the center bolt third.

Tighten
10 N·m (89 lb in)

2

Windshield Washer System Module Assembly