Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the I/P compartment. Refer to Instrument Panel Compartment Replacement.
2. Disconnect the blower motor resistor electrical connector.

1

Screw, Blower Motor Resistor (Qty 2)

Tighten
1.5 N·m (13 lb in)

2

Resistor, Blower Motor

Preliminary Procedure

Remove the I/P compartment. Refer to Instrument Panel Compartment Replacement .

1

Blower Motor Resistor Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Procedure

Disconnect the blower motor resistor electrical connector.

Tighten
1.5 N·m (13 lb in)

2

Blower Motor Resistor