Hood Replacement. Pontiac Solstice 2007

GM Service Manual Online

For 1990-2009 cars only

Makes 🢒 Pontiac 🢒 2007 🢒 Solstice 🢒 Engine 🢒 Engine Electrical 🢒 Hood Replacement

Callout	Component Name
Preliminary Procedure Remove the headlamps. Refer to Headlamp Replacement .
1	Hood Hinge Nuts (Qty: 4) Tip Disconnect the wiring harness from the hood on both sides. Mark the hood for proper alignment for re-installing. Notice: Refer to Fastener Notice in the Preface section. Tighten 25 N·m (19 lb ft)
2	Hood Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Callout

Component Name

Preliminary Procedure

Remove the headlamps. Refer to Headlamp Replacement .

Hood Hinge Nuts (Qty: 4)

Tip

Disconnect the wiring harness from the hood on both sides.
Mark the hood for proper alignment for re-installing.

Notice: Refer to Fastener Notice in the Preface section.

Tighten
25 N·m (19 lb ft)

Hood

Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Callout	Component Name
Preliminary Procedure Remove the headlamps. Refer to Headlamp Replacement .
1	Hood Hinge Nuts (Qty: 4) Notice: Refer to Fastener Notice in the Preface section. Tip Disconnect the wiring harness from the hood on both sides. Mark the hood for proper alignment for re-installing. Tighten 25 N·m (18 lb ft)
2	Hood Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.