Important: The following steps must be completed before using a symptom table.
- | The control modules can communicate via the serial data link. |
Visual/Physical Inspection
• | Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom. |
Intermittent
Thoroughly inspect the wiring and connectors. An incomplete inspection of the wiring and connectors may result in misdiagnosis causing part replacement with the reappearance of the malfunction. If an intermittent malfunction exists, refer to
Testing for Intermittent Conditions and Poor Connections
.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom: