GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Solstice 🢒 General Information 🢒 Vibration Diagnosis and Correction 🢒 Propeller Shaft Replacement

Propeller Shaft Replacement Automatic, Manual Trans RPOZOK


Object Number: 1582847 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the floor panel tunnel rear panel. Refer to Floor Panel Tunnel Panel Replacement - Rear .
  2. Support the rear drive module (RDM).
  3. Remove the bolt from the differential case bracket assembly to body.

1

Propeller Shaft Coupling Nut (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tip

    • DO NOT remove the bolts from the coupler to the propeller shaft. Remove only the bolts from the coupler to the drive axle pinion flange.
    • Clean the threads and apply LOCTITE. Refer to Adhesives, Fluids, Lubricants, and Sealers .

Tighten
85 N·m (63 lb ft)

2

Propeller Shaft Coupler Bolt (Qty: 3)

3

CV Joint Mounting Bolt (Qty: 6)

Tip

    • The CV joint mounting bolts MUST be tightened in a star pattern sequence.
    • Clean the threads and apply LOCTITE. Refer to Adhesives, Fluids, Lubricants, and Sealers .

Tighten
40 N·m (30 lb ft)

4

CV Joint Mounting Bolt Spacer

5

Propeller Shaft

Tip

    • Before installation, apply a small amount of lubricant to the front and rear propeller shaft center bushings. Refer to Adhesives, Fluids, Lubricants, and Sealers .
    • Lower the front of the RDM to remove the propeller shaft from the pinion flange.