Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the fuse labeled HVAC CTRL (BATT).
2. Remove the knee bolster. Refer to Knee Bolster Replacement .
3. Disconnect the electrical connector.

1

Screw, Air Temperature Actuator

Tighten
1.5 N·m (13 lb in)

2

Actuator, Air Temperature - Right

Procedure

Recalibrate the Actuator. Refer to Actuator Recalibration