1

Passenger Assist Handle Bezel

2

Passenger Assist Handle Bolts (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

3

Instrument Panel Cluster Trim Plate Assembly

Tip
Lift up lower edge of the instrument panel cluster trim plate assembly only enough to reach fingers underneath in order to release the shift lever bezel retaining tabs from the instrument panel cluster trim plate assembly.

4

Shift Lever Bezel

Tip
If replacing ONLY the shift lever bezel. Refer to Console Shift Lever Bezel Replacement .

5

Shift Indicator

Tip

1. Lift the shift indicator up for access.
2. Disconnect the shift indicator electrical connector.

6

Shift Control Range Select Lever Clip

7

Shift Control Knob Retaining Screw

Tighten
2.5 N·m (22 lb in)

Tip
It is not necessary to fully remove the shift control knob retaining screw.

8

Shift Control Knob

Tip
If replacing the shift control knob, remove the shift lever bezel from the shift control indicator. Refer to Console Shift Lever Bezel Replacement .