GM Service Manual Online
For 1990-2009 cars only

Icon

Icon Definition


Object Number: 296880  Size: GT

Important: Twisted-pair wires provide an effective "shield" that helps protect sensitive electronic components from electrical interference. If the wires were covered with shielding, install new shielding.

In order to prevent electrical interference from degrading the performance of the connected components, you must maintain the proper specification when making any repairs to the twisted-pair wires shown :

   • The wires must be twisted a minimum of 10 turns per 31 cm (12 in) to a maximum of 17 turns per 31 cm (12 in) as measured anywhere along the length of the wires and may be untwisted up to 5 cm (2 in) from the back of the connector.
   • The drain wire must be wrapped around the twisted pair a minimum of 10 turns 31 cm (12 in) to a maximum of 17 turns per 31 cm (12 in).
   • The twisted pair and the drain wire must be continuously covered by the shield tape aluminum side inward. The shield tape must be covered with tape.